|
Specifications
|
|
Standards
|
IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u, IEEE 802.3af (PoE), 802.1p (QoS priority), 802.1Q (VLAN), 802.1X (security authentication), 802.11i ready (security WPA2), 802.11e ready (wireless QoS), 802.11F (wireless roaming)
|
|
Ports
|
10BASE-T/100BASE-TX Ethernet, 12V DC power
|
|
Buttons
|
Reset
|
|
Cabling type
|
Unshielded twisted pair (UTP) Category 5
|
|
LEDs
|
Power, PoE, Wireless, Ethernet
|
|
Operating system
|
Linux
|
|
Setup/Configuration
|
|
Web user interface
|
Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)
|
|
Management
|
|
SNMP version
|
SNMP version 1, 2c, 3
|
|
Event logging
|
• Email notification
• Remote syslog
|
|
Web firmware upgrade
|
Firmware upgradable through web browser
|
|
Diagnostics
|
Flash, RAM, LAN, WLAN
|
|
Dynamic Host Configuration Protocol (DHCP)
|
DHCP client
|
|
Operating Modes
|
|
Access point
|
Access point mode, point-to-point bridge mode, point-to-multipoint bridge mode, repeater mode
|
|
Wireless
|
|
Spec/modulation
|
Radio and modulation type: 802.11b/DSSS, 802.11g/OFDM
|
|
Channels
|
Operating channels: 11 North America, 13 most of Europe (ETSI and Japan)
|
|
Internal antennas
|
None
|
|
External antennas
|
2 (omnidirectional) 3 dBi SMA detachable
|
|
Transmit power
|
Transmit power (adjustable) @ normal temp range: 802.11b: 18 dBm; 802.11g: 16 dBm
|
|
Antenna gain in dBi
|
3
|
|
Receiver sensitivity
|
802.11.g: 54 Mbps @ -72 dBm, 802.11.b: 11 Mbps @ -85 dBM
|
|
Security
|
|
WEP/WPA/WPA2
|
WEP 64-bit/128-bit, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2-ENT
|
|
Access control
|
Wireless connection control: MAC-based
|
|
SSID broadcast
|
SSID broadcast enable/disable
|
|
802.1X
|
IEEE 802.1X support
|
|
Wireless client isolation
|
Wireless client devices can be Isolated from each other either within an SSID or between 2 SSIDs
|
|
Quality of Service
|
|
QoS
|
• 4 queues
• WMM wireless priority
|
|
General
|
|
• Wireless roaming based on IAPP
• Auto-channel selection
|
|
Environmental
|
|
Dimensions
W x H x D
|
8.66 x 6.69 x 1.50 in.
(220 x 170 x 38 mm)
|
|
Weight
|
1.69 lb (0.765 kg)
|
|
Power
|
12V 1A DC input, and IEEE 802.3af compliant PoE max power draw: 3.48W
|
|
Certification
|
FCC, ICES 003, CE
|
|
Operating temperature
|
14º to 131ºF (-10º to 55ºC)
|
|
Storage temperature
|
-22º to 158ºF (-30º to 70ºC)
|
|
Operating humidity
|
10% to 90%, noncondensing
|
|
Storage humidity
|
5% to 95%, noncondensing
|
|
Package Contents
|
|
• Cisco WAP2000 Wireless-G Access Point with PoE
• 2 SMA detachable dipole antennas (3 dBi)
• User guide on CD-ROM
• Quick installation guide
• Ethernet network cable
• Power adapter
• Registration card
|
|
Minimum Requirements
|
|
• 802.11b, 802.11g wireless adapter with TCP/IP protocol installed per PC
• Switch/router with PoE support or PoE injector when used with PoE
• Web-based configuration: Java-enabled web browser
|
|
Product Warranty
|
|
1-year limited hardware warranty
|
